Frame-Co Benchmaster
The new design of Benchmaster means the Pushmaster hand tool can be loaded into the unit for easier joining. The powerful cam action combined with the size and strength of Pushmaster drives V Nails into the hardest of timbers. Yet its gentle hand action suits joining small mouldings, velvet and swept frames. Precision engineered, all metal construction the Benchmaster is very stable when used.
* Suitable for high quality, low volume professional picture framing.
* Will join most timbers including very hard woods. Takes all size V-Nails.
* Easy to use, quick to set up and portable.
* Pushmaster is NOT included.
Frame-Co Hobbiclamp Cord Clamp
Two stage clamping system is quick and easy to operate, for clamping picture frames whilst glue dries.
New tensioning device improves clamping pressure on all four corners for a tight join.
Kit contains Cord Clamp and tensioner.
Frame-Co Strap Clamp
Holds frames up to 1.5m square.
The precision engineered locking mechanism makes the clamp quick and easy to use.
The band is spring steel, with flexible plastic corners enabling any angle mitre to be clamped.
With the Strap Clamp you can see the frame complete before joining.
No limit to moulding width.
Suitable for joining 4,6,8 and 10 sided frames.
LightCraft A4 Lightbox
A4 ART & CRAFT LIGHT BOX
- Dimmable LED lighting
- Consistent light across the whole panel fence
- Tracing area that comfortably takes A4 size
- Energy efficient-Low heat emission
- 2m USB cable for use through Computer/Laptop
- Mains UK/EU Plug with USB slot
- Output voltage: 5V/5W
- Colour temperature: 6000-6500 kelvin
- Overall dimension: 360 x 270 x 8mm
- Working surface dimensions: 440 x 320mm
LightCraft A3 Lightbox
A3 ART & CRAFT LIGHT BOX
- Dimmable LED lighting
- Consistent light across the whole panel fence
- Tracing area that comfortably takes A3 size
- Energy efficient-Low heat emission
- 2m USB cable for use through Computer/Laptop
- Mains UK/EU Plug with USB slot
- Output voltage: 5V/7W
- Colour temperature: 6000-6500 kelvin
- Overall dimension: 480 x 360 x 8mm
- Working surface dimensions: 440 x 320mm
- Switch: Touch switch with dimmer feature
Badger Airbrush – 150 Bottom Feed
Bottom feed, dual action, internal mix
Airbrush supplied with medium head, bottom feed colour cup, 2 x 3/4oz jars, spare needle and instruction booklet.
Badger Airbrush – 200 Bottom Feed Prescision Spray Set
Single action, bottom feed airbrush with universal needle, supplied with 3/4 oz. Jar, 1 oz Jar, Regulator, Hose, 250ml propellant, Sprayway airbrush cleaner and Instruction Booklet.
This single action bottom feed air-brush will produce the same soft spray patterns as the dual action air-brushes, but when the trigger is depressed, a set amount of fluid is sprayed. The amount of fluid can be changed by turning the needle adjustment screw located at the back of the handle.
Please note, due to the included airbrush cleaner and propellant, postage restrictions mean that this set cannot be posted, but is available in our Dorchester shop.
Badger Airbrush model 250
The model 250 basic spraygun will handle medium to heavy viscosity material for large over-all coverage. Ideal for modelling, school projects, workshops, ceramic underglazes etc.
The spray pattern can be adjusted from 18.9mm to 450.8mm by turning the paint tip at the front of the gun.
Supplied with regulator, hose and 1 x 3/4ox jar.
Badger Airbrush model 250 Set
The model 250 basic spraygun will handle medium to heavy viscosity material for large over-all coverage. Ideal for modelling, school projects, workshops, ceramic underglazes etc.
The spray pattern can be adjusted from 18.9mm to 450.8mm by turning the paint tip at the front of the gun.
Supplied with regulator, hose , 2 x 3/4ox jar and propellant.
Due to postage restrictions on propellant, we cannot post this product, it is available from our shop in Dorchester.
Propellant regulator
For Airbrushes
Adaptor for Compressor
For Airbrushes
Spare Jar with Lid
3/4 oz with lid, suitable for airbrushes.
Spare Jar with Lid
2 oz, with lid suitable for airbrushes.
Mini Mac “A” Compressor
This unit features Auto Shut-off, and will switch off when your airbrush is not being used.
Specifications:
Voltage/Amps: 230/1.4
Max Pressure: 3.5 bar/40psi
Max Inlet Air Flow: 60L/min/2 CFM
Noise: 57 Db/A
Dimensions: 170mm x 260mm x 250mm
Weight: 5.3kg